Our lighting product partner NVC offers a fantastic range of standards-compliant emergency lighting solutions to suit a wide variety of applications. From emergency exit signage to emergency ceiling fittings and emergency downlighters. Whatever your emergency lighting needs, NVC has you covered — check out the range at your local Kellihers Electrical/CT Electric branch, nationwide.
Lexington LED 3 Hour mantained/non-maintained exit box
Construction
- Robust steel body
- White gloss powder-coated finish
- Polycarbonate legend panel
- Supplied complete with arrow-down legend as shown
- NiCd battery cells (not suitable for use below 0°C)
Technical Details
- 3 hours operation on battery power after mains power failure
- Can be installed as maintained or non-maintained. Details in instructions.
- Momentary manual test button fitted
- 30m maximum viewing distance
- Self-test version, compliant with BS5266 available. Suffix STM3 as listed
Download Spec Sheet (PDF)
Nebraska (Lithium) IP65 LED slim emergency bulkhead
Construction
- Polycarbonate base and cover
- Cover fitted to base with stainless steel screws in threaded brass inserts
- Gear tray fixed to diffuser for instant access to terminal block & fixing points for faster installation
- Supplied with standard (“Man running towards door”) legend pack.
- 20mm conduit entry
- Lithium (LiFePO4) battery cells (not suitable for use below 0°C)
- 50% lower running costs than NiCd version
- 2x the operational life = half the maintenance cost
- No toxic substances used during manufacture
- Recyclable
Technical Details
- 175 lm on mains
- 133 lm on battery supply
- 1.9W
- 3 hours operation on battery power after mains failure
- 20m maximum viewing distance with standard legends
- 30m maximum viewing distance with drop-down attachment
- Self-test version, compliant with BS5266 available. Suffix STM3 as listed
- All variants can be installed as maintained or non-maintained. Wiring
diagrams are supplied in the instruction leaflet.
Download Spec Sheet (PDF)
Syracuse Emergency Light Fitting
Construction
- Battery pack and driver in separate cylindrical cases
- Supplied with clips for recessed mounting fitted
Technical Details
- 3 hours operation on battery power after mains power failure
- Non-maintained operation
- 3W – 3.6V, 3,000mAh
- 5W – 3.6V, 4,500mAh
- NiCd cells
- For recessed installation
Download Spec Sheet (PDF)